Merih Banner  

Gösterilen Mesajlar: 7 mesajdan 1 ile 7 arası

Konu: MastaG's OpenPLi-4 / Gstreamer 1.7.1 zero

  1. #1
    Advanced Member
    Giriş Tarihi
    05-10-2004
    Mekan
    38 Kayseri
    Yaş
    49
    Mesajlar
    8,301
    Kan Grubu
    0 Rh ( - )
    Üye No
    32504

    New Icon14 MastaG's OpenPLi-4 / Gstreamer 1.7.1 zero



    MastaG's OpenPLi-4 / Gstreamer 1.7.1
    (master git) images 2016-01-0)



    About it .

    all decodeur suported
    2016
    date 06/01/2015

    - - - Updated - - -

    Please reflash your receiver since a software update will most likely fail.
    Especially on spark/spark7162.

    Changes since previous release:

    - Gstreamer snapshot updated to 1.7.1:
    * The mp4 issue when playing from remote locations has been fixed upstream, so I've dropped the revert.
    * Libsoup has been updated so I've dropped the revert for the old libsoup as well.
    - DM800Se V2 and DM500HD V2 kernel config has been cleaned and more in sync with PLi's config for the other Dreambox models.
    - More free space by adding a task before do_package_write_ipk which will upx compress some binaries.
    * This should give us a few more MBs to work with (Dreambox *cough*).
    - Major rework of the meta-fulan BSP for spark thanks to Tapaat for helping me out.
    * Now using Tapaat's drivers which fixes the frambuffer (and 22khz?) issue.
    * Enable of the zram module.
    * Shipping his wifi drivers.
    * VFD time is now synced every 5 minutes using a cron job.
    * Software update and plugin-installation has been fixed.
    * Using Tapaat's lirc config for spark and spark7162.
    - The usual batch of dvbmediasink fixes by Christophecvr and mx3L:
    * A brand new divx/xvid bitstream unpacker by mx3L should fix playback of avi files with wrong fourcc.
    - Libsoup has been updated to 2.52 (from master-next).
    - Refactor wifi drivers a bit on Linux 2.6.18, not auto-loading the mt7600 anymore, the correct driver should hopefully be loaded when you plugin your wifi stick.

    Changes compared to openpli-oe-core gst-1:

    - Ships with gstreamer upstream master git:
    Using the same patches as openpli-oe-core gst-1 with only these changes:
    Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
    because this patch was already checked in upstream.
    - Every receiver uses christophecvr's multibox dvbmediasink.
    - Libsoup has been updated to 2.52 (from master-next).
    - Using libtrmp and rtmpdump from oe-alliance.
    - Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
    These are only applied for Dreambox receivers.
    - AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
    - IPTV Player from samsamsam included (thx to Athoik for the recipe).
    - Large list of public IPTV streams included thanks to the Japhar Team.
    - Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
    - DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
    added si2166b blindscan support.
    - Using aio-grab source from oe-alliance which includes fixes for spark receivers.

    Known issues:

    - DM800 first boot will take a while, please be patient. The next boot will be faster.
    - On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
    Please use 'duckbox' instead.
    - On Zgemma Star you cannot use full HD skins.
    This is a hardware/driver limitation.
    Please don't try it, it will crash enigma2.
    - Some Dreambox remotes may behave very sensitive.
    This causes button presses to register multiple times instead of just once.
    As a workaround you can adjust the *** interval:
    Go to: Menu - System - Input devices - dreambox remote control (native).
    Set "Change repeat and delay settings" to yes
    Set "Interval between **** when repeating:" to 200ms or 300ms.
    Press green button (OK)
    Now set the same delay for: "dreambox advanced remote control (native)" as well.

    TODO:
    - Linux 2.6.18: Create a plugin / ppanel to select which Realtek/Ralink driver to load on startup (eg. rt3070, rt55xx, mt7600), since they cannot be loaded at the same time.
    - Linux 2.6.18: Look into the v4l usb drivers.
    - Add Spark specific plugins by gorski.
    - Add meta-ini from OE-Alliance and shape it up for openpli-oe-core.



  2. #2
    Average Member
    Giriş Tarihi
    15-01-2012
    Mekan
    21 Diyarbakır
    Yaş
    66
    Mesajlar
    285
    Kan Grubu
    0 Rh ( + )
    Üye No
    573800

    Emre usta eline emeğine sağlık. Teşekkürler.
    Düzenleyen vuuno : 08-01-2016 at 09:16

  3. #3
    Advanced Member
    Giriş Tarihi
    05-10-2004
    Mekan
    38 Kayseri
    Yaş
    49
    Mesajlar
    8,301
    Kan Grubu
    0 Rh ( - )
    Üye No
    32504

    Alıntı Orijinal Mesaj Sahibi vuuno Mesajı Göster
    Emre usta eline emeğine sağlık. Teşekkürler.
    rica ederim kardeş

  4. #4
    Advanced Member
    Giriş Tarihi
    07-04-2005
    Mekan
    55 Samsun
    Mesajlar
    1,638
    Üye No
    90902

    paylaşımın içim teşekkürler emre kardeşim.keşke başka yerden paylaşsaydın indiremedim.

  5. #5
    Advanced Member
    Giriş Tarihi
    05-10-2004
    Mekan
    38 Kayseri
    Yaş
    49
    Mesajlar
    8,301
    Kan Grubu
    0 Rh ( - )
    Üye No
    32504

    Alıntı Orijinal Mesaj Sahibi sorgit Mesajı Göster
    paylaşımın içim teşekkürler emre kardeşim.keşke başka yerden paylaşsaydın indiremedim.
    kardeş dosyada sorun yok ben şuan yine tıkladım açılıyor

  6. #6
    Advanced Member
    Giriş Tarihi
    07-04-2005
    Mekan
    55 Samsun
    Mesajlar
    1,638
    Üye No
    90902

    choromdan indiremedim.frofoxsu kurdum ikidefa indirdim ikisindede hasarlı dosya dedi.neyse birisi bacup verirse deneriz.sorun yok.teşekkürler.

  7. #7
    Advanced Member
    Giriş Tarihi
    17-05-2005
    Mekan
    37 Kastamonu
    Mesajlar
    3,708
    Kan Grubu
    A Rh ( + )
    Üye No
    101821

    Alıntıdır

    Unofficial- Gstreamer 1.9.0.1 images 2016-05 -based on- OpenPLi 4




    - Najnowszy GStreamer 1.9.0.1 migawki na podstawie przepisów z christophecvr:
    * Prawidłowe ustalenie dla HLS wysypać na przystanku
    * Re-umożliwić poszukiwania RTMP i potencjalny wysypać poprawkę
    * Gstreamer1.0-libav jest teraz zbudowany przeciwko systemu ffmpeg zamiast (ta różni się od receptur chri użytkownika) *
    * łaty dvbmediasink dla Vu Solo 4K, hd1265 i HD1500 z OE-sojuszu
    - FFMpeg zaktualizowany do 3.0.2 i jest obecnie instalowany domyślnie *
    - Backporty do Enigma2 dla SH4 (głównie servicemp3.cpp pokrewne)
    - Fix EPG na odbiornikach SH4
    - Exteplayer3 jest teraz domyślnie instalowany, dziękuję mx3L i samsamsam *
    - Gstplayer jest teraz domyślnie instalowany, dziękuję mx3L i samsamsam
    - MediaTomb jest obecnie w paszach
    - MediaPlayer2 jest teraz domyślnie instalowany, dziękuję mx3L
    - SubsSupport (dla MediaPlayer2) jest teraz domyślnie instalowany, dziękuję mx3L
    - Nie bardziej rosyjski tuxtxt
    - Teraz można ustawić poziom debugowania ponownie w menu ustawień UI, dziękuję christophecvr
    - Ostatnie zmiany Enigma2, dziękuję OpenPLi
    - Ostatnie zmiany openpli-oe-core, dziękuję OpenPLi
    - ServiceApp, dziękuję mx3L !!!



  8. Merih Banner Alt

Gönderme Kuralları

  • Yeni konu açamazsınız
  • Konuda cevap yazamazsınız
  • Eklenti yapamazsınız
  • Mesajlarınızı düzenleyemezsiniz
  •  
  • BB Kodları Açık
  • Smiley'ler Açık
  • Resim Kodları Açık
  • Video Kodları Açık
  • HTML Kodları Kapalı