TurkeyForum Facebook
Alıntı Yaparak Cevaplateşekkürler inmiyor imaj
MastaG's OpenPLi-4 / Gstreamer 1.7.1 solose
MastaG's OpenPLi-4 / Gstreamer 1.7.1
(master git) images 2016-01-0)
About it .
all decodeur suported
2016 date 06/01/2015
- - - Updated - - -
Please reflash your receiver since a software update will most likely fail.
Especially on spark/spark7162.
Changes since previous release:
- Gstreamer snapshot updated to 1.7.1:
* The mp4 issue when playing from remote locations has been fixed upstream, so I've dropped the revert.
* Libsoup has been updated so I've dropped the revert for the old libsoup as well.
- DM800Se V2 and DM500HD V2 kernel config has been cleaned and more in sync with PLi's config for the other Dreambox models.
- More free space by adding a task before do_package_write_ipk which will upx compress some binaries.
* This should give us a few more MBs to work with (Dreambox *cough*).
- Major rework of the meta-fulan BSP for spark thanks to Tapaat for helping me out.
* Now using Tapaat's drivers which fixes the frambuffer (and 22khz?) issue.
* Enable of the zram module.
* Shipping his wifi drivers.
* VFD time is now synced every 5 minutes using a cron job.
* Software update and plugin-installation has been fixed.
* Using Tapaat's lirc config for spark and spark7162.
- The usual batch of dvbmediasink fixes by Christophecvr and mx3L:
* A brand new divx/xvid bitstream unpacker by mx3L should fix playback of avi files with wrong fourcc.
- Libsoup has been updated to 2.52 (from master-next).
- Refactor wifi drivers a bit on Linux 2.6.18, not auto-loading the mt7600 anymore, the correct driver should hopefully be loaded when you plugin your wifi stick.
Changes compared to openpli-oe-core gst-1:
- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Libsoup has been updated to 2.52 (from master-next).
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
Known issues:
- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
Please use 'duckbox' instead.
- On Zgemma Star you cannot use full HD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the *** interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between **** when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
TODO:
- Linux 2.6.18: Create a plugin / ppanel to select which Realtek/Ralink driver to load on startup (eg. rt3070, rt55xx, mt7600), since they cannot be loaded at the same time.
- Linux 2.6.18: Look into the v4l usb drivers.
- Add Spark specific plugins by gorski.
- Add meta-ini from OE-Alliance and shape it up for openpli-oe-core.
teşekkürler inmiyor imaj
Düzenleyen adnan : 08-01-2016 at 08:48
firefoxdan indir kardeş diger tarayıcılar sorunlu malesefOrijinal Mesaj Sahibi adnan
tşk ederim kolay gelsin
eski gstreamer 1.7.0 olanlar kumanda ile 2dkda güncelleyebilirler.. tekrar imaj atmaya gerek yok
Bu imaj ile mms-Streamler calisiyormu? Biriniz deneyip haber verseniz lütfen. Mesela sunlar:
HD SİNEMA 1
mms://yayin7.canliyayin.org/sinema1
HD SİNEMA 2
mms://yayin7.canliyayin.org/sinema2
HD SİNEMA 3
mms://yayin7.canliyayin.org/sinema3
HD SİNEMA 4
mms://yayin7.canliyayin.org/sinema4
HD SİNEMA 5
mms://yayin7.canliyayin.org/sinema5
HD SİNEMA 6
mms://yayin7.canliyayin.org/sinema6
KANAL M mms
mms://yayin.networkbil.com/kanalm
Bende su an OpenATV 5.1 ve GST 1.7.0 var (22.12.2015 tarihli imaj) ve mms-Streamler sorunsuz calisiyor. Ama OpenATV 5.1 ve GST 1.7.1 kurdugum zaman (24.12.2015 tarihinden itibaren imajlar) mms-Streamleri actigimda crash oluyor. Eger bu sundugunuz OpenPli ile mms'ler calisiyorsa imaji degistirmek istiyorum.
Selamlar
Bende solo se v1 var ilk iki tanesini kanal listesine ekledim çalıştı..
Tamam tesekkürler.
Nasil indiriliyor. Firefox ile de denedim. Hep download degil upload yeri geliyor... Yardimci olabilirmisiniz? Tesekkürler.
Sag ol memorist, denedim ve mms'ler güzel calisiyor. Fakat tarih 01.01.1970'i gösteriyor ve benim USB-Stick'imdeki filmler vs. görünmüyor... Extra plugin'mi kurmak gerekiyor bu iki sorun icin acaba?
Tarih kendiliginden halloldu. Galiba Transponder'den güncellendi. Ama benim USB-Stick'i nasil hdd olarak baglayabilirim? Bir yardimci olsaniz lütfen.
zaman ayarını istanbul yap mediaplayer yada ortam oynatıcısından görünür ?
Tamam tarih halloldu, fakat bu USB-Stick'i nasil hdd olarak tanitacagim?
Alıntıdır
Unofficial- Gstreamer 1.9.0.1 images 2016-05 -based on- OpenPLi 4
- Najnowszy GStreamer 1.9.0.1 migawki na podstawie przepisów z christophecvr:
* Prawidłowe ustalenie dla HLS wysypać na przystanku
* Re-umożliwić poszukiwania RTMP i potencjalny wysypać poprawkę
* Gstreamer1.0-libav jest teraz zbudowany przeciwko systemu ffmpeg zamiast (ta różni siÄ™ od receptur chri użytkownika) *
* Å‚aty dvbmediasink dla Vu Solo 4K, hd1265 i HD1500 z OE-sojuszu
- FFMpeg zaktualizowany do 3.0.2 i jest obecnie instalowany domyślnie *
- Backporty do Enigma2 dla SH4 (gÅ‚ównie servicemp3.cpp pokrewne)
- Fix EPG na odbiornikach SH4
- Exteplayer3 jest teraz domyślnie instalowany, dziękuję mx3L i samsamsam *
- Gstplayer jest teraz domyślnie instalowany, dziękuję mx3L i samsamsam
- MediaTomb jest obecnie w paszach
- MediaPlayer2 jest teraz domyślnie instalowany, dziękuję mx3L
- SubsSupport (dla MediaPlayer2) jest teraz domyślnie instalowany, dziękuję mx3L
- Nie bardziej rosyjski tuxtxt
- Teraz można ustawić poziom debugowania ponownie w menu ustawień UI, dziękuję christophecvr
- Ostatnie zmiany Enigma2, dziękuję OpenPLi
- Ostatnie zmiany openpli-oe-core, dziękuję OpenPLi
- ServiceApp, dziękuję mx3L !!!
Gönderme Kuralları
