TurkeyForum Facebook
Alıntı Yaparak CevaplaOscam bildiğim bir konu değil ama, log dosyalarında 2000 tarihi var mart 2012 tarihi var.
Sistem zamanı doğru ayarlı mı?
OpenAZBox PLi MOD HD Prerelease 8 oscam sorunu
Herkeze iyi bayramlar. Cok ugraşmama ragmen oscamda kartimi bir türlü okutamadim newcs ok sbox ok cccam ok ama oscam bir türlü karti görmüyor denemedigim sürüm kalmadi calistirmayi başaran varmi? needınıt card uyarisi veriyor
oscam.conf
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
saveinithistory = 1
PreferLocalCards = 1
logfile = /tmp/oscam.log
maxlogsize = 10
[newcamd]
*** = 0102030405060708091011121314
Port = [email protected]:042700
[webif]
httpport = 16002
httpuser = xxxxxx
httppwd = xxxxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.1-192.168.255.255
oscam.server
[reader]
Label = PENT
Protocol = internal
Detect = cd
Device = /dev/sci0
mhz = 500
cardmhz = 357
EMMCache = 1,3,2
Group = 1
CAID = 0500
ident = 0500:042700
ecmwhitelist = [email protected]:34
services = pe*****se
oscam log
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:08:10 2000
-------------------------------------------------------------------------------
2000/01/01 1:08:10 2AAC8480 s >> OSCam << cardserver started, version 1.10rc-svn, build #5741 (mipsel-tuxbox-linux)
2000/01/01 1:08:10 2AAC8480 s version=1.10rc-svn, build #5741, system=mipsel-tuxbox-linux, nice=-1
2000/01/01 1:08:10 2AAC8480 s client max. idle=120 sec, debug level=0
2000/01/01 1:08:10 2AAC8480 s max. logsize=10 Kb, loghistorysize=4096 bytes
2000/01/01 1:08:10 2AAC8480 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2000/01/01 1:08:10 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:08:15 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:08:20 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:08:25 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:08:30 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:08:35 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:08:40 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:08:45 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:08:50 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:08:55 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:09:00 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:09:05 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:09:10 2AAC8480 s The current system time is smaller than the build date (Mar 7 2012). Waiting 5s for time to correct...
2000/01/01 1:09:15 2AAC8480 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 1:09:15 2AAC8480 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2000/01/01 1:09:15 2AAC8480 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 1:09:15 2AAC8480 s signal handling initialized (type=sysv)
2000/01/01 1:09:15 2AAC8480 s 3 service-id's loaded in 1ms
2000/01/01 1:09:15 2AAC8480 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2000/01/01 1:09:15 2AAC8480 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.provid" (err=2 No such file or directory), no provids's loaded
2000/01/01 1:09:15 2AAC8480 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.ird" (errno=2 No such file or directory) i****o guessing not loaded
2000/01/01 1:09:15 2AAC8480 s monitor: disabled
2000/01/01 1:09:15 2AAC8480 s camd33: disabled
2000/01/01 1:09:15 2AAC8480 s camd35: disabled
2000/01/01 1:09:15 2AAC8480 s cs378x: disabled
2000/01/01 1:09:15 2AAC8480 s newcamd: initialized (fd=7, port=16666, crypted)
2000/01/01 1:09:15 2AAC8480 s CAID: 0500
2000/01/01 1:09:15 2AAC8480 s provid #0: 042700
2000/01/01 1:09:15 2AAC8480 s radegast: disabled
2000/01/01 1:09:15 2BE634B0 h HTTP Server listening on port 16002
2000/01/01 1:09:15 2AAC8480 s http thread started
2000/01/01 1:09:15 2AAC8480 s creating thread for device /dev/sci0
2000/01/01 1:09:15 2AAC8480 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 1:09:15 2AAC8480 s waiting for local card init
2000/01/01 1:09:15 2C6634B0 r reader thread started (thread=2C6634B0, label=lower, device=/dev/sci0, detect=cd, mhz=500, cardmhz=500)
2000/01/01 1:09:15 2C6634B0 r lower card detected
2000/01/01 1:09:15 2C6634B0 r ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
2000/01/01 1:09:15 2C6634B0r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
Düzenleyen falldaemon : 25-10-2012 at 18:30
Oscam bildiğim bir konu değil ama, log dosyalarında 2000 tarihi var mart 2012 tarihi var.
Sistem zamanı doğru ayarlı mı?
control edeyim bi abi dikkat etmedim hic. eger bundan oluyorsa kendime yanarim:) cok ugraştim cünkü abi birde sormak istiyordum zaten senin sundugun imajlardan usr/lib/enigma2/python/plugins/extensions dan camd manageri ve usr/bin icinden scprit dosyalarini aldim buna ilave ettim ama ayni anda iki emuyu bir caliştiramadim sadece cccam calişiyor sorun bendemi yada iki emu ayni anda calişmiyormu?
yeni log
2011/11/29 03:14:24 0 s starting thread log_list_thread
2011/11/29 03:14:24 0 s log_list_thread thread started
2011/11/29 03:14:24 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6256 (mips-tuxbox-linux)
2011/11/29 03:14:24 0 s version=1.20-unstable_svn, build #6256, system=mips-tuxbox-linux, nice=-1
2011/11/29 03:14:24 0 s client max. idle=120 sec, debug level=0
2011/11/29 03:14:24 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2011/11/29 03:14:24 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/11/29 03:14:24 0 s The current system time is smaller than the build date (Jan 18 2012). Waiting up to 60 seconds for time to correct
2012/10/25 22:32:41 0 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2012/10/25 22:32:41 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/10/25 22:32:41 0 s signal handling initialized (type=sysv)
2012/10/25 22:32:41 0 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/10/25 22:32:41 0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/10/25 22:32:41 0 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/10/25 22:32:41 0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) i****o guessing not loaded
2012/10/25 22:32:41 0 s can't open whitelist file /var/tuxbox/config/oscam.whitelist
2012/10/25 22:32:41 0 s can't open cacheex-matcher file /var/tuxbox/config/oscam.cacheex
2012/10/25 22:32:41 0 s Starting listener 0
2012/10/25 22:32:41 0 s monitor: disabled
2012/10/25 22:32:41 0 s Starting listener 0
2012/10/25 22:32:41 0 s camd35: disabled
2012/10/25 22:32:41 0 s Starting listener 0
2012/10/25 22:32:41 0 s cs378x: disabled
2012/10/25 22:32:41 0 s Starting listener 0
2012/10/25 22:32:41 0 s newcamd: initialized (fd=5, port=19999, crypted)
2012/10/25 22:32:41 0 s -> CAID: 0500 PROVID: 042700
2012/10/25 22:32:41 0 s Starting listener 0
2012/10/25 22:32:41 0 s pandora: disabled
2012/10/25 22:32:41 0 s Starting listener 0
2012/10/25 22:32:41 0 s csp: disabled
2012/10/25 22:32:41 0 s Starting listener 0
2012/10/25 22:32:41 0 s radegast: disabled
2012/10/25 22:32:41 0 s starting thread http
2012/10/25 22:32:41 0 s http thread started
2012/10/25 22:32:41 0 s starting thread reader check
2012/10/25 22:32:41 0 s reader check thread started
2012/10/25 22:32:41 0 s starting thread check
2012/10/25 22:32:41 0 s check thread started
2012/10/25 22:32:41 0 s creating thread for device /dev/sci0
2012/10/25 22:32:41 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/10/25 22:32:41 0 s waiting for local card init
2012/10/25 22:32:41 5AA368 h HTTP Server listening on port 16005
2012/10/25 22:32:41 5A8910 r reader pent initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2012/10/25 22:32:42 5A8910 r pent card detected
2012/10/25 22:32:43 5A8910 r ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
2012/10/25 22:32:45 5A8910 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
buda card yokken log bu şekilde user baglaniyor kart takili iken user baglanmiyor
2012/10/25 22:38:12 0 s starting thread log_list_thread
2012/10/25 22:38:12 0 s log_list_thread thread started
2012/10/25 22:38:12 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6256 (mips-tuxbox-linux)
2012/10/25 22:38:12 0 s version=1.20-unstable_svn, build #6256, system=mips-tuxbox-linux, nice=-1
2012/10/25 22:38:12 0 s client max. idle=120 sec, debug level=0
2012/10/25 22:38:12 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/10/25 22:38:12 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/10/25 22:38:12 0 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2012/10/25 22:38:12 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/10/25 22:38:12 0 s signal handling initialized (type=sysv)
2012/10/25 22:38:12 0 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/10/25 22:38:12 0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/10/25 22:38:12 0 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/10/25 22:38:12 0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) i****o guessing not loaded
2012/10/25 22:38:12 0 s can't open whitelist file /var/tuxbox/config/oscam.whitelist
2012/10/25 22:38:12 0 s can't open cacheex-matcher file /var/tuxbox/config/oscam.cacheex
2012/10/25 22:38:12 0 s Starting listener 0
2012/10/25 22:38:12 0 s monitor: disabled
2012/10/25 22:38:12 0 s Starting listener 0
2012/10/25 22:38:12 0 s camd35: disabled
2012/10/25 22:38:12 0 s Starting listener 0
2012/10/25 22:38:12 0 s cs378x: disabled
2012/10/25 22:38:12 0 s Starting listener 0
2012/10/25 22:38:12 0 s newcamd: initialized (fd=5, port=19999, crypted)
2012/10/25 22:38:12 0 s -> CAID: 0500 PROVID: 042700
2012/10/25 22:38:12 0 s Starting listener 0
2012/10/25 22:38:12 0 s pandora: disabled
2012/10/25 22:38:12 0 s Starting listener 0
2012/10/25 22:38:12 0 s csp: disabled
2012/10/25 22:38:12 0 s Starting listener 0
2012/10/25 22:38:12 0 s radegast: disabled
2012/10/25 22:38:12 0 s starting thread http
2012/10/25 22:38:12 0 s http thread started
2012/10/25 22:38:12 0 s starting thread reader check
2012/10/25 22:38:12 0 s reader check thread started
2012/10/25 22:38:12 0 s starting thread check
2012/10/25 22:38:12 0 s check thread started
2012/10/25 22:38:12 0 s creating thread for device /dev/sci0
2012/10/25 22:38:12 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/10/25 22:38:12 0 s waiting for local card init
2012/10/25 22:38:12 5AA368 h HTTP Server listening on port 16005
2012/10/25 22:38:12 5A8910 r reader pent initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2012/10/25 22:38:14 0 s init for all local cards done
2012/10/25 22:38:14 0 s anti cascading disabled
2012/10/25 22:39:11 5ACF68 c client connected to 19999 port
2012/10/25 22:39:12 5ACF68 c encrypted newcamd:19999-client 127.0.0.1 granted (azb, au=on (1 reader))
2012/10/25 22:39:12 5ACF68 c user azb authenticated successfully (CCcam)
2012/10/25 22:39:12 5ACF68 c AU disabled for user azb
Düzenleyen falldaemon : 25-10-2012 at 22:45
Log dosyalarından görebildiğim kadarıyla, /etc/tuxbox/config içindeki dosyalar, /var/tuxbox/config içinde aranıyor ve bulunamıyor.Böyle bir sorun kesin.
Bu durumda ya, /var/tuxbox içine /etc/tuxbox/ içindeki config klsörünün kısa yolu yaratılacak.
Şu komutla bu yapılabilir;
ln -s /etc/tuxbox/config /var/tuxbox/config gibi... tabi önceside de, eğer /var içinde tuxbox dizini yoksa bu klasörü de ellle yaratman lazım.
Ya da OsCam'in Pli için /etc/tuxbox/config içinde dosyaları arayan versiyonunu bulman gerekecek. Senin kullandığın Oscam Enigma 1 için mi acaba.
Ekte verdiğim dosyaları /tmp dizinine atıp ipk kurulumlarını yapıp dene istersen.
Ben şu an deneyemiyorum, cihaz müsait değil. Verdiğim ipk dosyalarında chmod değerleri 755 olması gerekenler ne durumda bilemiyorum.
Verdiğim dosyaların kurulumunu yaptım, chmod sorunu yok.
Eklentilere UserScripts adında bir eklenti de kuruyor, işlemi burdan yapacaksın herhelde.
Ayrıca /usr/ içine camd dizini yaratıyor, içinde oscam var.
Yine /usr/script içine de oscam-1.00-trunk-svn4682-mips.sh dosyasını da yaratıyor. Bu da CamdManager dan başlatmayı sağlayabilir ama CamdManager için bunu düzenlemek te gerekebilir.
Ya da konsoldan ( telnetten ) şu komutu vermen gerekebilir, denemek için.
/usr/script/oscam-1.00-trunk-svn4682-mips.sh start
Eğer çalışırsa, CamdManager dan da çalışacak hale getiririz bu eklentiyi.
Düzenleyen alonzo : 26-10-2012 at 00:21
abi zaten var/tuxbox/config oluşturmuştum manuel etc/tuxbox/config icindeki oscam dosyalarini gormuyordu telneten /usr/bin/oscam & komutu verdigimde /var/tuxbox/config istiyordu neyse verdigin dosyayı denicem sonucu yazarim
Bence temiz bir kurulum yaparsan verdiğim dosyalar çalışacaktır.
Çalışınca da CamdManager den yönetecek gibi de ayarlarız. Ya da her açılışta otomatik başlayacak gibi /etc içinde de düzenleme yapılabilir.
Kolay gelsin.
yok abi olmadi gene kartin atr sini okuyor ondan sonrasi yok verdigin dosya oscami /usr/bin icine degilde /usr/camd icine kuruyor ordan manuel başlattim oscami ama sonuc ayni bir boşlugunda ve elinde kart varsa ugraşirsan azbox pli icin oscam sorununu cözmüş olursun bu konuda yabanci forumlardada baya sıkıntı var yada bana öyle geldi ilgin icin teşekkür ederim
acaba oscam dosyalarındamı hata yapıyorum neyse ya
Bir de, oscam.server dosyasındaOrijinal Mesaj Sahibi falldaemon
ident = 0100:00006a olan değeri ident = 0100:005221 olarak bir değiştir bakalım.
Merhaba!
CCcam ile beraber çalışacak gibi OSCam kurulumunu hazırladım.
faldaemon arkadaşımızın bir denemesini rica ediyorum, daha önce OSCam'i çalıştırdığı bir enigma varsa özellikle onda denese iyi olur.
Eğer yeni bir versiyon kurduysanız ( AlonzoMOD olmayan ) eklenti, camd lerin çalışması için gerekli olan enigma2-plugin-extensions-camdmanager eklentisini de isteyecektir. Bu eklentiyi de zipli dosyaya ilave ettim.
Eğer AlonzoMOD'larda birisine kurulucaksa, mesela Pli 2.1 eski kernel, bu durumda enigma2-plugin-extensions-camdmanager eklentisini kurmaya gerek yoktur, zaten yazılımın kendisinde var bu eklenti.
Fakat CCcam_2.3.0 da var AlonzoMOD'larda, bu yüzden,
ipkg install --force-overwrite /tmp/*.ipk komutuyla kurmak şart olacaktır.
CCcam ve OSCam'in son versiyonlarını kullandım. Umarım netice alırız, olmazsa da bir kaç denemeden sonra sonuca ulaşırız.
Kolay gelsin.
Düzenleyen alonzo : 27-10-2012 at 11:01
abi kurulumu sıfır openrsi 2.1 karnel 2.6.22.19 de gercekleştirdim kurulum sorunsuz oldu senin oscam dosyalari ile karti hic görmedi sc0 hata verdi logda öyle görünüyor camd managerden sadece oscam başliyor cccam devreye girmiyor onunda logunu incele bir istersen oscam calişiyor ama karti init etmiyor bendeki kart viacces ondan kaynaklanabilir başka kart yok elimde başka arkadaşlar deneyebilirler degişik kartlari olan. aynı confıg dream500 sorunsuz calişiyor malum ingilizcede yok oscamforumdan bilgi alip log sunayim:) abi loglari bir incele bakalim bir şey cıkacakmi
senin config log
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 02:01:08 2000
-------------------------------------------------------------------------------
2000/01/01 02:01:08 0 s starting thread log_list_thread
2000/01/01 02:01:08 0 s log_list_thread thread started
2000/01/01 02:01:08 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7817 (mipsel-unknown-linux-gnu)
2000/01/01 02:01:08 0 s version=1.20-unstable_svn, build #7817, system=mipsel-unknown-linux-gnu, nice=-10
2000/01/01 02:01:08 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 02:01:08 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2000/01/01 02:01:08 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 02:01:08 0 s The current system time is smaller than the build date (Oct 26 2012). Waiting up to 60 seconds for time to correct
2000/01/01 02:02:09 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 02:02:09 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2000/01/01 02:02:09 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2000/01/01 02:02:09 0 s signal handling initialized (type=sysv)
2000/01/01 02:02:09 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.srvid" (errno=2 No such file or directory)
2000/01/01 02:02:09 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.tiers" (errno=2 No such file or directory)
2000/01/01 02:02:09 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.provid" (errno=2 No such file or directory)
2000/01/01 02:02:09 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.guess" (errno=2 No such file or directory)
2000/01/01 02:02:09 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory)
2000/01/01 02:02:09 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.whitelist" (errno=2 No such file or directory)
2000/01/01 02:02:09 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.cacheex" (errno=2 No such file or directory)
2000/01/01 02:02:09 0 s Starting listener 0
2000/01/01 02:02:09 0 s monitor: initialized (fd=5, port=988)
2000/01/01 02:02:09 0 s Starting listener 0
2000/01/01 02:02:09 0 s camd33: disabled
2000/01/01 02:02:09 0 s Starting listener 0
2000/01/01 02:02:09 0 s camd35: disabled
2000/01/01 02:02:09 0 s Starting listener 0
2000/01/01 02:02:09 0 s cs378x: disabled
2000/01/01 02:02:09 0 s Starting listener 0
2000/01/01 02:02:09 0 s newcamd: initialized (fd=6, port=12345, crypted)
2000/01/01 02:02:09 0 s -> CAID: 0500 PROVID: 042700
2000/01/01 02:02:09 0 s Starting listener 0
2000/01/01 02:02:09 0 s pandora: disabled
2000/01/01 02:02:09 0 s Starting listener 0
2000/01/01 02:02:09 0 s csp: disabled
2000/01/01 02:02:09 0 s Starting listener 0
2000/01/01 02:02:09 0 s radegast: disabled
2000/01/01 02:02:09 0 s starting thread http
2000/01/01 02:02:09 0 s http thread started
2000/01/01 02:02:09 0 s starting thread reader check
2000/01/01 02:02:09 0 s reader check thread started
2000/01/01 02:02:09 0 s starting thread check
2000/01/01 02:02:09 0 s check thread started
2000/01/01 02:02:09 0 s azboxinternalreader [internal] creating thread for device /dev/sc0
2000/01/01 02:02:09 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 02:02:09 0 s waiting for local card init
2000/01/01 02:02:09 5B4CA0 r azboxinternalreader [internal] ERROR: Opening device /dev/sc0 (errno:2 No such file or directory)
2000/01/01 02:02:09 5B4CA0 r azboxinternalreader [internal] Cannot open device: /dev/sc0
2000/01/01 02:02:09 5BB418 h HTTP Server listening on port 10001
2000/01/01 02:03:09 5B4CA0 r azboxinternalreader [internal] ERROR: Opening device /dev/sc0 (errno:2 No such file or directory)
2000/01/01 02:03:09 5B4CA0 r azboxinternalreader [internal] Cannot open device: /dev/sc0
benim config log
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 02:01:04 2000
-------------------------------------------------------------------------------
2000/01/01 02:01:04 0 s starting thread log_list_thread
2000/01/01 02:01:04 0 s log_list_thread thread started
2000/01/01 02:01:04 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7817 (mipsel-unknown-linux-gnu)
2000/01/01 02:01:04 0 s version=1.20-unstable_svn, build #7817, system=mipsel-unknown-linux-gnu, nice=-10
2000/01/01 02:01:04 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 02:01:04 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2000/01/01 02:01:04 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 02:01:04 0 s The current system time is smaller than the build date (Oct 26 2012). Waiting up to 60 seconds for time to correct
2000/01/01 02:02:05 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 02:02:05 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2000/01/01 02:02:05 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2000/01/01 02:02:05 0 s signal handling initialized (type=sysv)
2000/01/01 02:02:05 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.srvid" (errno=2 No such file or directory)
2000/01/01 02:02:05 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.tiers" (errno=2 No such file or directory)
2000/01/01 02:02:05 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.provid" (errno=2 No such file or directory)
2000/01/01 02:02:05 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.guess" (errno=2 No such file or directory)
2000/01/01 02:02:05 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory)
2000/01/01 02:02:05 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.whitelist" (errno=2 No such file or directory)
2000/01/01 02:02:05 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.cacheex" (errno=2 No such file or directory)
2000/01/01 02:02:05 0 s Starting listener 0
2000/01/01 02:02:05 0 s monitor: initialized (fd=6, port=988)
2000/01/01 02:02:05 0 s Starting listener 0
2000/01/01 02:02:05 0 s camd33: disabled
2000/01/01 02:02:05 0 s Starting listener 0
2000/01/01 02:02:05 0 s camd35: disabled
2000/01/01 02:02:05 0 s Starting listener 0
2000/01/01 02:02:05 0 s cs378x: disabled
2000/01/01 02:02:05 0 s Starting listener 0
2000/01/01 02:02:05 0 s newcamd: initialized (fd=7, port=12345, crypted)
2000/01/01 02:02:05 0 s -> CAID: 0500 PROVID: 042700
2000/01/01 02:02:05 0 s Starting listener 0
2000/01/01 02:02:05 0 s pandora: disabled
2000/01/01 02:02:05 0 s Starting listener 0
2000/01/01 02:02:05 0 s csp: disabled
2000/01/01 02:02:05 0 s Starting listener 0
2000/01/01 02:02:05 0 s radegast: disabled
2000/01/01 02:02:05 0 s starting thread http
2000/01/01 02:02:05 0 s http thread started
2000/01/01 02:02:05 0 s starting thread reader check
2000/01/01 02:02:05 0 s reader check thread started
2000/01/01 02:02:05 0 s starting thread check
2000/01/01 02:02:05 0 s check thread started
2000/01/01 02:02:05 0 s lower [internal] creating thread for device /dev/sci0
2000/01/01 02:02:05 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 02:02:05 0 s waiting for local card init
2000/01/01 02:02:05 5B4C70 r lower [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2000/01/01 02:02:05 5BB3E8 h HTTP Server listening on port 10001
2000/01/01 02:02:06 5B4C70 r lower [internal] card detected
2000/01/01 02:02:07 5B4C70 r lower [internal] ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
2000/01/01 02:02:08 5B4C70 r lower [internal] Setting baudrate to 115161 bps
2000/01/01 02:02:08 5B4C70 r lower [internal] Calculated work ETU is 8.68 us
2000/01/01 02:02:09 5B4C70 r lower [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.57 (nearest possible to wanted user cardspeed of 3.57 Mhz)
buda camd manager calişma log
[email protected]:~# ps
PID USER VSZ STAT COMMAND
1 root 1748 S init [3]
2 root 0 SW [kthreadd]
3 root 0 SWN [ksoftirqd/0]
4 root 0 SW [events/0]
5 root 0 SW [khelper]
40 root 0 SW [kblockd/0]
41 root 0 SW [cqueue/0]
44 root 0 SW [khubd]
62 root 0 SW [pdflush]
63 root 0 SW [pdflush]
64 root 0 SW [kswapd0]
65 root 0 SWN [kprefetchd]
66 root 0 SW [aio/0]
67 root 0 SW [cifsoplockd]
68 root 0 SW [cifsdnotifyd]
612 root 0 SW [mtdblockd]
694 root 0 SW [kjournald]
791 root 5304 S /usr/bin/set_outports
794 root 0 DW [scard]
840 root 0 SW [kVcxoRegulate]
841 root 0 SW [kMonitorVideo]
842 root 0 SW [kTask1]
843 root 0 SW [kTask2]
844 root 0 SW [kTask3]
972 daemon 1732 S /sbin/portmap
991 messageb 2784 S /usr/bin/dbus-daemon --system
998 root 2384 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_hos
1001 root 3616 S /usr/sbin/inetd
1004 root 3572 S telnetd
1005 root 3568 S -sh
1006 root 13704 S /usr/sbin/smbd
1008 root 6976 S /usr/sbin/nmbd
1011 root 3316 S /sbin/syslogd -n -C64 -m 20
1013 root 3252 S /sbin/klogd -n
1023 avahi 3528 S avahi-daemon: running [azboxhd.local]
1024 root 13704 S /usr/sbin/smbd
1025 avahi 3528 S avahi-daemon: chroot helper
1027 root 3252 S /bin/sh /usr/bin/enigma2.sh
1031 root 55612 S /usr/bin/enigma2
1066 root 3468 S /bin/sh /usr/script/CCcam_2.3.0_oscam-svn7817_cam.sh
1069 root 3680 S /usr/bin/oscam
1070 root 3272 S sleep 15
1071 root 4156 S < /usr/bin/oscam
1073 root 3568 R ps
[email protected]:~# ps
PID USER VSZ STAT COMMAND
1 root 1748 S init [3]
2 root 0 SW [kthreadd]
3 root 0 SWN [ksoftirqd/0]
4 root 0 SW [events/0]
5 root 0 SW [khelper]
40 root 0 SW [kblockd/0]
41 root 0 SW [cqueue/0]
44 root 0 SW [khubd]
62 root 0 SW [pdflush]
63 root 0 SW [pdflush]
64 root 0 SW [kswapd0]
65 root 0 SWN [kprefetchd]
66 root 0 SW [aio/0]
67 root 0 SW [cifsoplockd]
68 root 0 SW [cifsdnotifyd]
612 root 0 SW [mtdblockd]
694 root 0 SW [kjournald]
791 root 5304 S /usr/bin/set_outports
794 root 0 DW [scard]
840 root 0 SW [kVcxoRegulate]
841 root 0 SW [kMonitorVideo]
842 root 0 SW [kTask1]
843 root 0 SW [kTask2]
844 root 0 SW [kTask3]
972 daemon 1732 S /sbin/portmap
991 messageb 2784 S /usr/bin/dbus-daemon --system
998 root 2384 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_hos
1001 root 3616 S /usr/sbin/inetd
1004 root 3572 S telnetd
1005 root 3568 S -sh
1006 root 13704 S /usr/sbin/smbd
1008 root 6976 S /usr/sbin/nmbd
1011 root 3316 S /sbin/syslogd -n -C64 -m 20
1013 root 3252 S /sbin/klogd -n
1023 avahi 3528 S avahi-daemon: running [azboxhd.local]
1024 root 13704 S /usr/sbin/smbd
1025 avahi 3528 S avahi-daemon: chroot helper
1027 root 3252 S /bin/sh /usr/bin/enigma2.sh
1031 root 55612 S /usr/bin/enigma2
1069 root 3680 S /usr/bin/oscam
1071 root 4956 S < /usr/bin/oscam
1080 root 3568 R ps
[email protected]:~#
ugraşin icin teşekkurler abi
buda card takılı degil iken alinan log kart takılı iken cccam baglanmiyor kartı cikarinca cccam baglanıyor
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 02:00:59 2000
-------------------------------------------------------------------------------
2000/01/01 02:00:59 0 s starting thread log_list_thread
2000/01/01 02:00:59 0 s log_list_thread thread started
2000/01/01 02:00:59 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7817 (mipsel-unknown-linux-gnu)
2000/01/01 02:00:59 0 s version=1.20-unstable_svn, build #7817, system=mipsel-unknown-linux-gnu, nice=-10
2000/01/01 02:00:59 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2000/01/01 02:00:59 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2000/01/01 02:00:59 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 02:00:59 0 s The current system time is smaller than the build date (Oct 26 2012). Waiting up to 60 seconds for time to correct
2000/01/01 02:02:00 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 02:02:00 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2000/01/01 02:02:00 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2000/01/01 02:02:00 0 s signal handling initialized (type=sysv)
2000/01/01 02:02:00 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.srvid" (errno=2 No such file or directory)
2000/01/01 02:02:00 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.tiers" (errno=2 No such file or directory)
2000/01/01 02:02:00 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.provid" (errno=2 No such file or directory)
2000/01/01 02:02:00 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.guess" (errno=2 No such file or directory)
2000/01/01 02:02:00 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory)
2000/01/01 02:02:00 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.whitelist" (errno=2 No such file or directory)
2000/01/01 02:02:00 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.cacheex" (errno=2 No such file or directory)
2000/01/01 02:02:00 0 s Starting listener 0
2000/01/01 02:02:00 0 s monitor: initialized (fd=6, port=988)
2000/01/01 02:02:00 0 s Starting listener 0
2000/01/01 02:02:00 0 s camd33: disabled
2000/01/01 02:02:00 0 s Starting listener 0
2000/01/01 02:02:00 0 s camd35: disabled
2000/01/01 02:02:00 0 s Starting listener 0
2000/01/01 02:02:00 0 s cs378x: disabled
2000/01/01 02:02:00 0 s Starting listener 0
2000/01/01 02:02:00 0 s newcamd: initialized (fd=7, port=12345, crypted)
2000/01/01 02:02:00 0 s -> CAID: 0500 PROVID: 042700
2000/01/01 02:02:00 0 s Starting listener 0
2000/01/01 02:02:00 0 s pandora: disabled
2000/01/01 02:02:00 0 s Starting listener 0
2000/01/01 02:02:00 0 s csp: disabled
2000/01/01 02:02:00 0 s Starting listener 0
2000/01/01 02:02:00 0 s radegast: disabled
2000/01/01 02:02:00 0 s starting thread http
2000/01/01 02:02:00 0 s http thread started
2000/01/01 02:02:00 0 s starting thread reader check
2000/01/01 02:02:00 0 s reader check thread started
2000/01/01 02:02:00 0 s starting thread check
2000/01/01 02:02:00 0 s check thread started
2000/01/01 02:02:00 0 s azboxinternalreader [internal] creating thread for device /dev/sci0
2000/01/01 02:02:00 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 02:02:00 0 s waiting for local card init
2000/01/01 02:02:01 5B4C70 r azboxinternalreader [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2000/01/01 02:02:01 5BB3E8 h HTTP Server listening on port 10001
2000/01/01 02:02:02 0 s init for all local cards done
2000/01/01 02:02:02 0 s anti cascading disabled
2000/01/01 02:02:02 5BD838 c plain dvbapi-client granted (localuser, au=off)
2000/01/01 02:02:02 5BD838 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2000/01/01 02:03:14 5BF6E0 c client connected to 12345 port
2000/01/01 02:03:14 5BF6E0 c encrypted newcamd:12345-client 127.0.0.1 granted (falldaemon, au=off)
2000/01/01 02:03:14 5BF6E0 c user falldaemon authenticated successfully (CCcam)
2000/01/01 02:03:14 5BF6E0 c AU disabled for user falldaemon
Valla benim yaptığım denemelerde CCcam sorunsuz çaışıyor, kart takılıyken de, çıkıkkende.
Kartlardan da bir şeyler okuyor ki senin loglarda da öyle görünüyor.
Bende eski nagravizyon ve criptoworks kartlar var, onlarla deniyorum.
Bir de, DM500 de çalıştırdığın dosyaları bana göndersen, onlar da bir fikir verir belki.
dreambox 500 de calişan config ilk mesajda yazdıgım ayarlar onda bir tek oscam dosyasi mips degil bende neden cccam başlamadi acaba abi birde senin denemelerde karti atrsini okuduktan sonra caid falan cikiyormu? abi sende calişan bir log eklesene acaba sorun karttami benim buda calişan kart ayarlar ayni
2012/10/25 16:09:17 300162B0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2012/10/25 16:09:17 300162B0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2012/10/25 16:09:17 300162B0 s signal handling initialized (type=sysv)
2012/10/25 16:09:17 300162B0 s 3 service-id's loaded in 2ms
2012/10/25 16:09:17 300162B0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/10/25 16:09:17 300162B0 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/10/25 16:09:17 300162B0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) i****o guessing not loaded
2012/10/25 16:09:17 300162B0 s monitor: disabled
2012/10/25 16:09:17 300162B0 s camd33: disabled
2012/10/25 16:09:17 300162B0 s camd35: disabled
2012/10/25 16:09:17 300162B0 s cs378x: disabled
2012/10/25 16:09:17 300162B0 s newcamd: initialized (fd=9, port=16666, crypted)
2012/10/25 16:09:17 300162B0 s CAID: 0500
2012/10/25 16:09:17 300162B0 s provid #0: 042700
2012/10/25 16:09:17 300162B0 s radegast: disabled
2012/10/25 16:09:17 300162B0 s http thread started
2012/10/25 16:09:17 300162B0 s creating thread for device /dev/sci0
2012/10/25 16:09:17 300162B0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/10/25 16:09:17 300162B0 s waiting for local card init
2012/10/25 16:09:17 31025B50 h HTTP Server listening on port 16xxx
2012/10/25 16:09:17 31825B50 r reader thread started (thread=31825B50, label=pent, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2012/10/25 16:09:17 31825B50 r pent card detected
2012/10/25 16:09:18 31825B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
2012/10/25 16:09:19 31825B50 r ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
2012/10/25 16:09:21 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2012/10/25 16:09:22 31825B50 r [viaccess-reader] using ecm #61f for long viaccess ecm
2012/10/25 16:09:22 31825B50 r type: Viaccess (standard atr), caid: 0500, serial: 3216xxxxxx
2012/10/25 16:09:22 31825B50 r providers: 2 (FFFD00,042700)
2012/10/25 16:09:22 31825B50 r [viaccess-reader] ready for requests
2012/10/25 16:09:22 31825B50 r found cardsystem viaccess
2012/10/25 16:09:22 31825B50 r [viaccess-reader] card detected
2012/10/25 16:09:22 31825B50 r [viaccess-reader] serial: 321xxxxxxxxxxxxxxxx
2012/10/25 16:09:23 31825B50 r provider: 1, id: FFFD00, name: ISSUER, sa: BFBAxxxx, geo: empty
2012/10/25 16:09:23 31825B50 r provider: 2, id: 042700, name: MCT, sa: BFxxxxx, geo: FF FF FF FF
2012/10/25 16:09:23 31825B50 r class: 4E, expiry date: 2012/08/18 - 2013/08/17
2012/10/25 16:09:24 300162B0 s init for all local cards done
2012/10/25 16:09:24 300162B0 s anti cascading disabled
2012/10/25 16:09:24 33828B50 c client connected to 16666 port
abi dikkatimi cekti ATR Fsmax is: 5 Mhz, clocking card to 5.25 (nearest possible to wanted user cardspeed of 5.25 Mhz) bunun anlami nedir mhz denmi kart kilitleniyor
CCcam'in çalışmamasının sebebi, verdiğim ipk dosyalarını kurduğıun zaman /etc içine örnek CCcam.cfg dosyası kopyalanıyor, bu yüzden C satırını yeniden girmek lazım vaya kendi CCcam.cfg dosyasınızı etc içinegöndermeniz gerekir.
abi sorun yokmuş cccan biraz gec giriyormuş devreye dosyalar calişiyor kurulum normal ama ben karti init yaptiramadim bir türlü. dosyalar openrsi icin sunulabilir ellerin dert görmesin orjinal fw geciş yaptim artik modül girişini beklicem e2 icin.
bu yazılım zaten yavaş çalışıyor 10 dakika kullanınca kanallar arası geçiş kabus gibi oluyor ben bir önceki yazılıma geri döndüm
i think that alonzo mod is the best.
Thank you very much. :) :smilies39:
Gönderme Kuralları
